About Rumbux crash protection bars
Rumbux specializes in crash protection systems for dual purpose motorcycles. We manufacture crash bars for the front and rear areas of the motorcycle. The rear crash bars can also be used as pannier brackets for soft luggage.
Our products are Cad designed with safety and protection in mind. The styling of the motorcycle is followed to give you a product which complements your bike. We mount to the frame of the bike and as little as possible to the engine as this can result in engine damage in a crash situation. We design to protect you, the rider as well as your bike. Our products are available through motorcycle resellers worldwide for easy access and installation by professional technicians. Our products can also be installed by you, using our step by step fitment procedure supplied.
Technical:
These products are manufactured mostly from SAE 1010 cold rolled tube (diameter 25.4 x2mm), which is precision mandrel bent to exact sizes. Laser cut brackets are welded to manipulated tubes in jigs to give repeatability of product.
Our flagship product is the Full Spec Endurance crash bar system (FSE / 3 Part). This system comprises of an upper crash bar and an engine crash bar with an integrated bash plate. You will notice the following form and functions:-
Upper crash bars:
This part of the crash bar is for front and side protection. We realize that a snug fit around the upper area (traditional tank area), might look neater, but this does not give adequate protection for your legs, the radiator, and the tank area. Access to the tank panels becomes problematic with the snug fit. The wider wing also creates the necessary lift of the motorcycle when it lands on its side in order for the handlebars to move freely without any damage. This is not always possible, as in the case of the KTM690R.
Engine crash bars:
These bars are mounted to the frame of the motorcycle as far as possible and as little as possible to the engine. This gives adequate protection for oil filters, side covers, water pumps, gear levers, foot brakes, side stands etc. The original ground clearance is maintained.
Bash plate:
The 4.5 mm aluminum bash plate is mounted to the engine crash bars and not directly to the engine. This gives protection of the lower parts of the engine and the exhaust system. Traditionally, bash plates are mounted directly to the engine, whereby engine damage can still occur as mounting points takes the brunt of the impact. With the integrated Rumbux crash bar, this is not the case.
We design with the following in mind:
– Follow the styling of the motorcycle, to give you a nice looking product.
– Easy access to motorcycle components.
– Easy fitment and removal of systems.
– Adequate protection of the motorcycle.
– Adequate protection for the rider.
The crash bar, carrier & bash plates coatings are as follows:
- Specialized cleaning of the finished product.
- Zinc phosphate plating.
- E -Coat
- Powder coat.
Protection crash bars for adventure motorcycles; Bash plate; Engine crash bar; Upper crash bar; Soft luggage; Top plate; Carrier plate; Pannier bags; Delivery motorcycle carrier bracket; Lower crash bar; Tail pack; Crash bar bags; Adventure motorcycle accessories; Adventure luggage; Insurance for motorcycles; Motorcycle accessories; Motorcycle Gear; Protection crash bars; Crash protection bars; Crash bar; Crash bars ; Protection bars; Adventure motorcycles; Dual purpose motorcycles; Pannier bars; Front crash bars; Rear crash bars; Motorcycle parts; Adventure riding; Motorcycle crash bar; Adventure motorcycle crash protection bars; Motorcycle gear; Motorcycle accessories; Crash bars; Motorcycle luggage; Motorcycle protection gear; Crash bar; Crashbar; crash-bar